 Aquarius Rainwater Harvesting
Garden Pro Range
The collected rainwater in the both systems can be used for gardening watering, cleaning vehicles and general use. The Pro System specification makes it ideal for more robust applications and in certain commercial applications where harvested rainwater can be utilised.Although this range cannot be used for internal domestic applications the filter specification is very high as all Aquarius Systems. As we want to deliver to our clients only the very best of products.
The Garden Pro range features 1400L, 2000L, 3000L , 6000L. All in one piece moulded tanks. Tanks can be slaved together for greater volumes of storage. Larger bespoke hdpe tanks are available up to 75,000 litres in single units as shown in our Aquapod system.
Garden Pro Above Ground System
 In the Above Ground version, as the Handy System. The rainwater is collected in the Aquarius Tank via the special 3P technik downpipe filter which is easily fitted to your chosen downpipe. The filter takes out much of the silt, sand and leave’s that are suspended in the flow from the guttering system.
The Above Ground Pro system features an integral pump system. Utilising a very robust stainless steel pump with a sieve filter fitted to the inlet end of the pump. The pump also features a run dry switch to stop pump burn out when the tank is empty or low. The Garden Pro’s pump is connected via a delivery hose which connects to a simple BSP connection at the top of the tank as shown opposite. Making for ease of connection to your hose or washer application.
Garden Pro Underground System
The Underground Pro Range features the same heavy duty stainless steel pump as the above ground system. The pump also features a run dry switch to stop pump burn out when the tank is empty or low.
As the Aquarius Tank is located below the surface it needs to be connected to your underground drainage system. So instead of a downpipe filter as the above ground version the Pro Underground has an integral filter fitted to the inlet. It also features a trapped overflow system that will allow excess rainwater to bypass to the surface water drainage system. The inlet filter system will also overflow to the drainage system if the Aquarius tank is full. This means that both filter and overflow outlets need to be connected into a local surface water manhole on your property, on new builds this will need to be installed with the system and can be provided by H20 at an extra cost. At the top of the Aquarius tank the pump delivery hose can connect into either a surface box or a watering post which are easily installed. This can also be supplied at an extra cost by H20.
|
